Make your own Candles

If you’re into home design, you know that DIY projects are a popular choice for creating home decor that’s beautiful and unique. However, while DIY projects are satisfying, it can be hard to find one that’s fun and simple.

Enter the candle. Endlessly customizable, classically beautiful and no sweat to make, they’re a crafter’s favorite for a reason. 

Want to know the easy way to do it? here’s in 8 steps:

Supply list: Soy candle

  • One package of candle-making soy wax
  • One package of large candle wicks
  • One bottle of fragrance oil
  • One spatula
  • One heat-proof container
  • One double boiler
  • One thermometer
  • One pair of chopsticks or pencils

Step 1: Measure the wax
Before you begin the candle-making process, make sure you have a clean, flat surface to work on. You can also protect the area with newspaper or paper towels. Move anything that you don’t want to get wax on.

Measure out how much wax you would need to fill your container, then double it. That’s how much wax you will need to melt.

Step 2: Melt the wax

Pour the wax into your double boiler and allow to melt for 10 to 15 minutes, stirring frequently.

Step 3: Add fragrance oils

When your candle wax is melted, it’s time to add fragrance oils. Follow the instructions on your wax package for how much to add. Simply pour it into your melted wax and stir for a few seconds. While this step is optional, we definitely recommend it for a lovely smell.

Add fragrance oils

Step 4: Attach the wick

The wick needs to be attached to the bottom of your container before you pour in the wax. You can attach the wick by dipping it in the melting wax then quickly sticking it to the bottom of the container. Let the wax sit five minutes to harden. Alternatively, you can superglue it.

Step 5: Pour the wax

Before you pour the wax into your container, let it cool for a few minutes. When the temperature on the thermometer reads 140 degrees, it’s time to pour.

Then, slowly pour the wax into your container. Hold the wick in place, but don’t pull on it. Leave a small amount of wax in the boiler for topping off your candle later.

Step 6: Secure the wick

To prevent your wick from swaying in the melty wax, you need to secure it in place. Lay two chopsticks across the top of the container. Sandwich the wick in between so that it stays centered while the wax hardens.

Secure the wick

Allow the wax to set for four hours at room temperature.

Step 7: Add more wax

If your candle hardened with an unsightly top (think cracks or holes) simply reheat and add your remaining wax. Let harden.

Step 8: Cut the wick.

Your candle wick should be less than half an inch long. If, when lit, the candle flickers or has a tall flame, trim the wick.

And that’s IT.

Snug moments with your brand new candles!

Snug Hug

Leave a Reply

Your email address will not be published. Required fields are marked *